RescueToolMan.com and Howell Rescue Systems, Inc.

The CMC Rescue Rack offers several innovative features to provide enhanced performance. The “fat” aluminum bars provide excellent control for rescue loads. The bars are center drilled to reduce weight and allow better heat dissipation and have CMC’s exceptionally long wearing proprietary finish that we use on our aluminum Rescue 8s. The finish also prevents transfer of material to the rope, common with bare aluminum bars. The Turbo Bar at the top has a training groove to center the rope plus a tie-off pin on the side. The second bar has a straight slot and a training groove to help warn the user of a mis-rigged rack. Since the top two bars do most of the work, they are a full one inch in diameter. The next four angled slot bars are 7/8 inch. The stainless steel frame has a welded eye and features a special locking nut with no sharp corners that might damage the rope. The rack comes assembled, ready for use. 3ó MBS: General Use 11.5-13 mm, 4,946 lbf. (22 kN); Light Use 9.5-11.5 mm, 4,047 lbf. (18 kN).